Key Points and Two Major Technical Difficulties in Sliding Contact Line Installation - Yangzhou Dairui

Dairui Electric recommends for you

Current collector, steel body sliding line   Current collector, steel body sliding line  

Sliding contact line, its preparatory work before installation, as well as the confirmation of system layout, and some technical key points and difficulties during the installation process, these are all related to sliding contact line installation and are essential theoretical knowledge for this work. Therefore, let's take some time to explain it in detail below.

   1. Preparatory work before sliding contact line installation

      For the sliding contact line, the preparations to be made before installation, specifically speaking, mainly include the following:

 (1) The related mobile equipment and tracks have been installed and checked without any problems.

      (2) The incoming and outgoing cables for power supply, as well as the outgoing cables for mobile equipment, have been fully laid in place.

      (3) The interface requirements for input and current collectors have been checked and confirmed without any issues or doubts.

      (4) At the installation site, there is a work platform that can be used normally, as well as relevant technical and operational personnel. In addition, construction materials and equipment to be used have all been in place.

   2. Confirmation of system layout in sliding contact line

       For this, it mainly involves five aspects, specifically the overall system, expansion components, fixed clamps, power input units, and maintenance units. Moreover, these five parts are indispensable. In terms of content, it mainly involves quantity and location. And for the overall system, it is generally arranged horizontally.

 3. Some technical key points and difficulties during the installation process of sliding contact line

       Technical key point and difficulty one: Generally speaking, the centerline of the sliding contact line is parallel to the travel trajectory of the equipment. However, in practice, deviation may occur, making the two not parallel. Therefore, in this case, straightness requirements cannot be imposed, but an efficient working method should be chosen.






Note: The above information and technical parameters are from Yangzhou Dairui Electric Co., Ltd.