Darui Electric recommends for you
Safety power tool cabinet can provide a suitable insulation tool storage environment
Safety power tool cabinet is formed by integral rolling and pressing of steel plates, with the overall style adopting the style of modern industrial control panel cabinets, surface sprayed with plastic, sealing degree reaching the protection level - IP5 of EN60529/IEC529 standard; the front is a glass observation door, convenient for observation, and equipped with a door-controlled lighting lamp, on the right side of the door there is a display and control operation panel (GJG-3/4 type), which displays the temperature, humidity and equipment operation status inside and outside the cabinet in real time. Four universal wheels and positioning screws are installed at the bottom of the cabinet; four lifting cups are installed on the top of the cabinet for convenient transportation.
The power safety tool cabinet, also known as the safety power tool cabinet, according to its function can be divided into ordinary ventilation dehumidification cabinet, intelligent drying dehumidification cabinet, intelligent dehumidification cabinet, etc. The shell is made of 1.2 cold-rolled plate, using artistic electrostatic spraying, high-strength tempered transparent glass (appearance color is microcomputer gray). Ground wires are equipped with ground wire winding frames and numbered plates with clips and reflective coating, so that the ground wires are wound neatly and not easily damaged, placed neatly and convenient to use; insulating gloves are equipped with anti-adhesion support plates, insulating baffles, insulating rods, voltage test pens, and operating rods are all equipped with rubber pad positioning cards, safety belts, foot pedals, and keys are equipped with special hooks, sign boards are placed in separate grids according to types, the fence net is equipped with a special bag, the net poles are equipped with special tubes, the net pole seats are placed in separate grids, the gas mask is equipped with a special box, and the respirator is equipped with a special slide plate.
The safety power tool cabinet can provide a suitable insulation tool storage environment, keeping them dry, and meeting the requirements of the national standard for insulation tool storage environment (GB/T18037). It can choose different internal structure assembly methods according to different placement needs, suitable for placement and use; according to different sizes of insulation tools, choose different specifications of products to meet the placement needs.
Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.
