I-beam cable trolleys have been widely used in various lifting machinery

Darui Electric recommends for you



The I-beam cable trolley is made of national standard profiles through stamping, bending, end sealing, machine tool processing, welding, and other fine processes. The surface treatment includes galvanizing and powder spraying. The main load-bearing parts are processed with high-frequency treatment to ensure the durability and sufficient strength of the product. The finished products are not only beautiful in appearance but also sturdy and durable. The cable trolley is made entirely of materials, with strict quality control at every step, making the products beautiful and durable. Using cable trolleys to lay cables not only prevents the cables from being scratched on the ground but also greatly reduces the waste of labor and reduces friction on the conductors during laying.

　　

　　I-beam cable trolley as a relatively common logistics power transmission system, manufacturers and customers generally divide it into two categories according to the different types of its slide rail tracks: C-type rail I-beam trolleys and I-type rail I-beam trolleys. This type of power transmission system adapts to most ordinary environments, and its performance and stability are strong, with very few occurrences of short circuits, sparks, and other phenomena.

　　

　　Since the I-beam cable trolley has certain risks during use, doing relevant inspection work can, to a certain extent, reduce the risk to a low level. Therefore, operators need to conduct detailed inspections on the wheel grooves, wheel axles, pull plates, hooks, and other parts of the trolley when using it. During the inspection, the main things to check are whether there are cracks, damage, whether the rotation is flexible, whether the screws are loose, etc. If problems are found, it is not allowed to use it. Especially when deformation or cracks are found in the trolley and hook, it must not be used. In addition to these inspections, whether the traction direction of the steel wire rope and the position of the guide wheel pulley are correct is also an important part of the inspection, which operators must not ignore.



The I-beam cable trolley device is used for the suspension and movement of cables during the movement of mobile power supply machinery, and has been widely applied in various lifting machinery. It consists of three parts: the traction trolley, the cable trolley, and the terminal trolley. The traction trolley follows the cable guiding (traction) device of the mobile machinery. Each mobile machinery is equipped with one, which moves back and forth with the mobile machinery. The intermediate cable trolleys suspend the cable within the range of the I-beam track and move with the traction trolley. Both ends are equipped with buffer bumpers. The number of trolleys depends on the length of movement. The terminal trolley is fixed at the end of the I-beam guide rail, and generally, each mobile machinery is equipped with one. It is suitable for indoor and outdoor use, with high dust, large temperature differences, low environmental requirements, and stable operation. The cable trolley bearings of Anneng trolleys use spherical contact, making the movement of the trolley flexible, stable, uniform, and with an extremely low failure rate.





Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.