How to install the sliding contact line?
Many customers, after purchasing the sliding contact line, do not carefully read the installation manual or consult the manufacturer about installation precautions, resulting in non-standard installation and subsequent problems. Here, the editor introduces common issues in the installation of safe sliding contact lines.
Question 1: Some workers who have never installed sliding contact lines do not know the installation process and do not know where to start.
Answer: Taking the sliding contact line of Yangzhou Dary Co., Ltd. as an example, first, our company will ship with a detailed installation manual, and installers can follow the manual for installation. Secondly, if there are unclear installation issues later, you can also consult the after-sales installation service personnel. Thirdly, the editor explains that for sliding contact line installation, first, pull the line beside the steel rail beam, then installers weld directly in the air, while ground workers first fix the sliding contact line on the hanging frame, then lift it to the angle steel position through overhead hoisting ropes, and install it sequentially.
Question 2: During the butt joint of safe sliding contact lines, should the aluminum joints be tightened firmly at once?
Answer: When installing safe sliding contact lines, do not tighten the aluminum joints all at once, because later adjustments to the sliding contact line parallelism are needed. After installing the sliding contact line and confirming no issues, then tighten the bolts.
Question 3: Sliding contact line current collector - what should be noted during debugging?
Answer: During the operation of the sliding contact line current collector, pay attention to whether the collector head runs smoothly in the sliding contact line slot, whether there is sparking, to further determine the stability of operation.
Finally, the editor explains that in fact, any high-quality product, if not installed properly, is like buying a low-quality product. Installation is very important. It is recommended that installers, when unclear, must consult the sliding contact line manufacturer's personnel.
