DLC Cable Trolley I-Beam Trolley
DLC Cable Trolley I-Beam Trolley is used for hanging and moving cables of mobile power supply machinery during movement, and has been widely applied in various types of lifting machinery. This device has the advantages of sturdy structure, flexible movement, and safety and reliability.
The trolley consists of three parts: the traction trolley, cable trolley, and terminal trolley. The traction trolley follows the cable guiding (traction) device of the mobile machinery, with one per mobile machine, moving back and forth with the machine. The intermediate cable trolleys hang the cable within the range of the I-beam track and move with the traction trolley, with buffer bumpers installed at both ends. The number of trolleys varies according to the length of movement. The terminal trolley is fixed at the end of the I-beam guide rail, generally one per mobile machine.
This series of trolleys is divided into five models: I, II, III, IV, and V. If users adopt 12#, 14#, 16#, or larger I-beams, they can specify this when ordering, and our factory can supply the complete set.
Product Introduction:
The HC series cable trolley series light-load type cable conduction trolley device is used for hanging and moving cables of mobile power supply machinery during movement, and has been widely applied in various types of lifting machinery. This device has the advantages of sturdy structure, flexible movement, and safety and reliability.
Light-load type cable conduction trolley consists of three parts: the traction trolley, cable trolley, and terminal trolley. The traction trolley follows the cable guiding (traction) device of the mobile machinery, with one per mobile machine, moving back and forth with the machine. The intermediate cable trolleys hang the cable within the range of the I-beam track and move with the traction trolley, with buffer bumpers installed at both ends. The number of trolleys varies according to the length of movement. The terminal trolley is fixed at the end of the I-beam guide rail, generally one per mobile machine.
This series of trolleys is divided into five models: I, II, III, IV, and V. If users adopt 12#, 14#, 16#, or larger I-beams, they can specify this when ordering, and our factory can supply the complete set.
Product Introduction:
The HC type cable trolley series is a form of power supply for crane trolleys. It consists of wheels, brackets, and support plates. The soft cable is fixed on the support plate, and the traction frame moves synchronously with the cable trolley, thereby achieving power supply for the trolley.
The HC series cable trolleys are divided into medium-load type, heavy-load type, and light-load type. Therefore, the trolley wheels are of three types: Ф80, Ф63, and Ф50, with a load capacity of ≤50∽150kg. Each type is divided into single-layer, double-layer, and three-layer according to the number of support plate layers. Each type has three forms: the first is the cable traction trolley, the terminal is the fixed wire hanging frame, and the middle is the cable trolley (see figure below).
Light-load type cable conduction trolley Description
1. After the fixed wire hanging frame is installed, a baffle should be hung behind it.
2. Adjust the traction head so that the trolley does not touch the upper and lower edges of the traction hole during the entire travel.
3. The cable length is 1.2 times the crane span plus 8 meters.
4. Adjust the traction wire rope so that its length is less than the length of the same section of cable. During operation, the traction wire rope bears the force.
5. When the cable diameters are different, soft rubber should be padded between the cable clamps to make their outer diameters basically the same, so that the cables can be clamped tightly.
6. When laying cables, consider that the support plates on both sides are evenly stressed.
7. When the cable trolley has two or three layers, the requirements are the same.
8. The double washers on the trolley device are adjustment washers. When the guide rail is not suitable, place the washers on the inner side of the fixed plate to adjust the width of the track gauge. The factory default is manufactured according to I 100*68*4.5, I 120*74*5, I140*80*5, I 160*88*6. Non-standard trolleys are processed and made according to drawings.
Typical configuration diagram of cable trolley device
Light-load type cable conduction trolley
