HXPnl-T-85/300 Rigid (Steel) Busbar Trolley is available in two types: single-line and double-line equal feed type. Except for the double-line equal type, which is denoted as JGH-□II, the single-line type is not additionally annotated. The installation methods of the busbar trolley generally include upper sliding contact and lower sliding contact, and other installation methods can also be adopted according to user requirements. The installation brackets for the busbar trolley are generally placed every 3 meters. Under special circumstances, reinforcement measures can be taken to appropriately increase the distance. The phase-to-phase distance between three busbar trolleys is 400mm. For low-impedance busbar trolleys,
Detailed introduction:
HXPnl-T-85/300 Rigid (Steel) Busbar Trolley
Detailed introduction of
Under normal circumstances, it is supplied in fixed lengths of 6 meters.
The installation spacing of insulation brackets for steel busbar trolleys is generally 3 meters.
The busbar trolley is divided into single-line and double-line equal feed types. Except for the double-line equal type, which is denoted as JGH-□II, the single-line type is not additionally annotated.
The installation methods of the busbar trolley generally include upper sliding contact and lower sliding contact, and other installation methods can also be adopted according to user requirements.
The installation brackets for the busbar trolley are generally placed every 3 meters. Under special circumstances, reinforcement measures can be taken to appropriately increase the distance. The phase-to-phase distance between three busbar trolleys is 400mm. For low-impedance busbar trolleys, the phase-to-phase distance can be increased to 450mm.
HXPnl-T-85/300 Rigid (Steel) Busbar Trolley
Detailed introduction of
Under normal circumstances, it is supplied in fixed lengths of 6 meters.
The installation spacing of insulation brackets for steel busbar trolleys is generally 3 meters.
The busbar trolley is divided into single-line and double-line equal feed types. Except for the double-line equal type, which is denoted as JGH-□II, the single-line type is not additionally annotated.
The installation methods of the busbar trolley generally include upper sliding contact and lower sliding contact, and other installation methods can also be adopted according to user requirements.
The installation brackets for the busbar trolley are generally placed every 3 meters. Under special circumstances, reinforcement measures can be taken to appropriately increase the distance. The phase-to-phase distance between three busbar trolleys is 400mm. For low-impedance busbar trolleys, the phase-to-phase distance can be increased to 450mm.
